Is your Kitchenaid dishwasher clean light blinking? This can be confusing and annoying.
The clean light on your Kitchenaid dishwasher can start blinking for various reasons. It usually signals an issue that needs your attention. Understanding the possible causes and solutions can save time and frustration. In this blog, we’ll explore why the clean light blinks and how to fix it.
Whether it’s a minor glitch or a more serious problem, you’ll learn steps to diagnose and resolve the issue. Stay with us to get your dishwasher back in working order, and enjoy spotless dishes again.
Common Causes
Is your Kitchenaid dishwasher clean light blinking? This can be frustrating. Understanding the common causes can help you fix it faster.
Power Supply Issues
The first thing to check is the power supply. Your dishwasher needs a steady supply of electricity. A sudden power outage or a tripped breaker can cause the clean light to blink. Ensure the dishwasher is plugged in properly. Check the circuit breaker to see if it has tripped.
| Possible Cause | Solution |
|---|---|
| Power Outage | Wait for the power to return |
| Tripped Breaker | Reset the breaker |
| Unplugged Dishwasher | Plug it back in |
Door Latch Problems
Another common cause is a problem with the door latch. The dishwasher will not start if the door is not closed properly. This can also cause the clean light to blink. Check the door latch for any damage. Make sure it is closing properly.
- Inspect the door latch for damage
- Ensure the door is closing properly
- Replace the latch if it is broken
Control Board Malfunctions
The control board is the brain of your dishwasher. It manages all functions. A malfunctioning control board can cause the clean light to blink. This is usually a more serious issue. It may require professional help.
- Check if other functions are working
- Reset the dishwasher by turning off the power for a few minutes
- Contact a professional if the issue persists
Initial Troubleshooting Steps
If your Kitchenaid dishwasher clean light is blinking, don’t panic. This issue is common and usually easy to resolve. Here, we will guide you through some initial troubleshooting steps. These steps will help you identify and possibly fix the problem.
Resetting The Dishwasher
One of the first steps to try is resetting the dishwasher. This can often clear any minor glitches. Follow these simple steps:
- Turn off the dishwasher.
- Unplug it from the power source.
- Wait for about 5 minutes.
- Plug it back in and turn it on.
This method can often reset the system and stop the blinking light.
Checking Power Supply
A faulty power supply can cause the clean light to blink. Ensure the dishwasher is properly connected to a power outlet. Check the following:
- Inspect the power cord for any damage.
- Ensure the outlet is working by testing another device.
- Check the circuit breaker to ensure it has not tripped.
Fixing any power supply issues might solve the blinking light problem.
Inspecting Door Latch
The door latch must be secure for the dishwasher to work. A loose or broken latch can cause the clean light to blink. Follow these steps:
- Open the dishwasher door.
- Inspect the latch for any visible damage.
- Ensure it clicks into place when you close the door.
- If damaged, replace the latch with a new one.
A properly functioning door latch can help resolve the issue.
Resetting The Control Panel
Resetting the control panel of your KitchenAid dishwasher can solve many issues. If the clean light is blinking, a reset might be necessary. This section will guide you through simple methods to reset the control panel.
Power Cycle Method
One of the easiest ways to reset your KitchenAid dishwasher is by performing a power cycle. This method can clear minor electronic glitches.
- Turn off the dishwasher and unplug it from the power source.
- Wait for at least 5 minutes. This allows the internal components to reset.
- Plug the dishwasher back in and turn it on. Check if the clean light is still blinking.
Control Panel Button Reset
If a power cycle does not work, you can try resetting the control panel using the buttons.
- Ensure the dishwasher door is securely closed.
- Locate the “Heated Dry” and “Normal Wash” buttons on the control panel.
- Press the “Heated Dry” button, then the “Normal Wash” button.
- Repeat this sequence three times: Heated Dry, Normal Wash, Heated Dry, Normal Wash, Heated Dry, Normal Wash.
- Wait for the dishwasher to start a short diagnostic cycle.
- After the cycle, check if the clean light is still blinking.
These methods should help you reset your KitchenAid dishwasher’s control panel. If issues persist, you may need professional assistance.
Credit: www.youtube.com
Inspecting The Heating Element
If your Kitchenaid dishwasher’s clean light is blinking, it may be due to a faulty heating element. The heating element is responsible for drying your dishes. If it is not working, your dishes may come out wet. This section will guide you through inspecting the heating element.
Locating The Heating Element
First, locate the heating element in your dishwasher. It is usually found at the bottom of the dishwasher tub. It looks like a long, thin metal rod. Ensure the dishwasher is unplugged before inspecting.
Testing For Continuity
Testing the heating element for continuity is essential. This will help you determine if it is working. You will need a multimeter for this test. Follow these steps:
- Set your multimeter to the lowest resistance setting.
- Touch the multimeter probes to the heating element terminals.
- Check the reading on the multimeter.
If the multimeter shows a reading between 10 and 50 ohms, the heating element is working. If there is no reading, the heating element is faulty.
Replacing The Heating Element
If the heating element is faulty, you need to replace it. Follow these steps to replace it:
- Disconnect the power to the dishwasher.
- Remove the lower dish rack.
- Disconnect the wires from the heating element terminals.
- Unscrew the mounting brackets holding the heating element.
- Remove the old heating element and replace it with a new one.
- Reconnect the wires to the terminals.
- Secure the new heating element with the mounting brackets.
- Replace the lower dish rack.
Once the new heating element is in place, restore power to the dishwasher. Run a test cycle to ensure it is working correctly.
Cleaning The Filters
Is your KitchenAid dishwasher clean light blinking? It might be time to clean the filters. This simple task can help your dishwasher run smoothly. It also ensures your dishes come out sparkling clean. Let’s break down how to clean the filters step by step.
Removing The Filters
First, locate the filters at the bottom of the dishwasher. There are usually two filters: a coarse filter and a fine filter. Twist the coarse filter counterclockwise to unlock it. Then, lift it out carefully. Next, remove the fine filter by pulling it up and out.
Rinsing And Scrubbing
Hold the filters under warm running water. Use a soft brush to scrub away any food particles or debris. You can use a gentle dish soap if needed. Make sure to clean both sides of the filters thoroughly.
Reinstalling The Filters
After cleaning, place the fine filter back in its spot. Ensure it fits snugly. Then, align the coarse filter with its slot and twist it clockwise to lock it in place. Double-check that both filters are secure before closing the dishwasher.
Checking Water Inlet Valve
Is your Kitchenaid dishwasher’s clean light blinking? This could indicate an issue with the water inlet valve. The water inlet valve controls water flow into the dishwasher. A malfunction can prevent the dishwasher from operating properly. This section will guide you through checking the water inlet valve.
Identifying The Valve
First, locate the water inlet valve. It is usually found at the bottom of the dishwasher. You’ll need to remove the lower kick plate to access it.
Here are the steps to find it:
- Unplug the dishwasher from the power source.
- Turn off the water supply connected to the dishwasher.
- Remove the screws holding the kick plate in place.
- Look for a component with water supply and electrical connections. This is the water inlet valve.
Testing Water Flow
Now, test the water flow to ensure the valve functions correctly. You’ll need a multimeter for this task.
- Disconnect the water supply hose from the valve.
- Place the hose in a bucket and turn on the water supply. Water should flow freely.
- If water flows freely, the issue might be electrical. If not, the valve could be clogged.
- Next, use a multimeter to check the valve’s solenoid. Place the multimeter probes on the valve’s terminals. The reading should be between 500-1500 ohms. If it reads outside this range, replace the valve.
Replacing The Valve
If testing indicates a faulty valve, replace it. Follow these steps to replace the water inlet valve:
- Purchase a compatible water inlet valve for your Kitchenaid dishwasher.
- Disconnect the power and water supply.
- Remove the kick plate and locate the faulty valve.
- Disconnect the electrical connectors and water supply hose from the old valve.
- Unscrew the mounting bolts holding the valve in place.
- Install the new valve by reversing the removal steps.
- Reconnect the water supply hose and electrical connectors.
- Secure the valve with mounting bolts and replace the kick plate.
- Turn on the water supply and plug in the dishwasher.
After replacing the valve, run a test cycle to ensure proper function.
Inspecting Float Switch
If your KitchenAid dishwasher’s clean light is blinking, one possible issue could be the float switch. This small component plays a crucial role in the dishwasher’s operation. Inspecting and ensuring its proper function can solve many common issues.
Locating The Float Switch
The float switch is typically found at the bottom of the dishwasher. Open the dishwasher door and remove the lower rack. Look for a round, plastic piece that moves up and down. This is the float switch.
Ensuring Proper Movement
To check its movement, press down on the float switch gently. It should move up and down freely. If it feels stuck or doesn’t move smoothly, this could be the problem. A stuck float switch can prevent the dishwasher from working correctly.
Cleaning The Float Switch
If the float switch is dirty, it might not move properly. Clean the switch by removing any debris or food particles. Use a damp cloth to wipe the area around the float switch. Ensure there is no grime or buildup that could cause it to stick.
| Step | Action |
|---|---|
| 1 | Locate the float switch at the bottom of the dishwasher. |
| 2 | Press down gently to check its movement. |
| 3 | Clean around the switch to ensure it moves freely. |
By following these steps, you can ensure your float switch functions properly. This might stop the clean light from blinking and get your dishwasher back to normal.
Credit: dengarden.com
When To Call A Professional
Experiencing issues with your KitchenAid dishwasher? Sometimes, a blinking clean light indicates a problem. While some issues can be resolved at home, there are times when calling a professional is necessary.
Persistent Issues
If the blinking clean light persists despite troubleshooting, it might be time to seek help. Persistent issues such as repeated blinking or failure to reset could signal deeper problems. A professional can diagnose and fix these issues correctly.
Complex Repairs
Some dishwasher problems require complex repairs. If you encounter issues with the motor, circuit board, or wiring, it’s best to call an expert. Attempting these repairs on your own can lead to further damage.
| Issue | Professional Needed |
|---|---|
| Motor Malfunction | Yes |
| Circuit Board Problems | Yes |
| Wiring Issues | Yes |
Warranty Considerations
Before attempting any repairs, check your warranty. Unauthorized repairs can void the warranty. Professionals are trained and authorized to perform warranty-covered repairs, ensuring your protection.
- Check the warranty terms
- Contact authorized service centers
- Keep warranty documentation handy
Credit: fixitnow.com
Frequently Asked Questions
Why Is My Kitchenaid Dishwasher Clean Light Blinking?
The clean light blinks due to an error or malfunction. It could indicate a heating issue or a clogged filter.
How Do I Reset My Kitchenaid Dishwasher?
To reset, press the “Heated Dry” and “Normal” buttons in sequence. Then, press the “Start” button.
Can A Blinking Clean Light Be Fixed Easily?
Yes, a blinking clean light can often be fixed by resetting the dishwasher. Check the manual for detailed instructions.
What Does A Blinking Clean Light Mean?
A blinking clean light usually indicates an error. It often signifies a problem with heating or water flow.
Conclusion
Facing a blinking clean light on your Kitchenaid dishwasher can be frustrating. Simple troubleshooting steps can often fix the issue. Start by checking the door latch and cleaning the filter. Also, examine the water supply and reset the dishwasher. Regular maintenance can prevent future problems.
Don’t hesitate to consult the manual or seek professional help if needed. Keep your dishwasher running smoothly and enjoy hassle-free cleaning.